Welcome to the official website of Dengzhuo Chemical!
  • +86 0539 8782638
  • chau@dzcata.com

Catalyst for Waste Engine Oil Refining

Brief Introduction

The oil refining catalyst is mainly used for the catalytic cracking of waste/used oil. The catalyst can further catalyze the oil which cannot be processed after the waste oil is gradually distilled, so as to extract more and better diesel oil and gasoline oil with good quality from the waste oil.

The reaction is summarized as below

Typical physical and chemical property

DZC-EA, DZC-EB catalyst can obviously improve the quality of oil. The cetane number of the product diesel is generally 10-20 units higher than that of FCC diesel.

The catalyst for waste engine oil is used for gas-phase catalysis to ensure safety and catalytic effect under the condition of proper space speed, to ensure that the tail oil of waste engine oil is completely cracked from the beginning to the end of refining, and there is no green oil component, and the oil out has no peculiar smell, bright color and turbidity approaching water white to light yellow. The quality of oil is close to the national standard, and as the diesel engine fuel, the exhaust gas meets the corresponding national standards, greatly reducing the air pollution, truly achieving the recycling and utilization of resources, no secondary pollution, and becoming a green environmental protection high-tech new energy.


Name

Waste Engine Oil Catalyst

Model

DZC-EA ; DZC-EB

Appearance

White stripe

     Diameter(mm)

Φ1-3

     Length(mm)

5~15

Pore Volume (ml/g)

>0.3

BET (m2/g)

≥230

     Bulk Density(g/ml)

≥0.6

     Intensity(N/cm)

≥150