Welcome to the official website of Dengzhuo Chemical!
  • +86 0539 8782638
  • chau@dzcata.com

Catalyst for Tire Pyrolysis Oil Refining

Brief Introduction

The oil refining catalyst is mainly used for the catalytic cracking of used/waste oil. It can further catalyze the oil which cannot be processed after the waste oil is gradually distilled, so as to extract more and better diesel oil and gasoline oil with good quality from the waste oil.

The reaction is summarized as below

Typical physical and chemical property

DZC-TA, DZC-TB oil refining catalyst is used in a non-hydrogen state under atmospheric pressure.With special materials as the matrix, the catalyst has reasonable pore distribution, suitable surface area and structural stability under hydrothermal conditions. The catalyst also has targeted cracking treatment for the characteristics of large fraction of tire oil, greatly improving the oil taste and good stripping Performance and regeneration coking performance, at the same time, limit the deposition of coke precursor in the molecular sieve channel, thus prolonging the reaction cycle, and can be used in refineries without hydrogen source.


Name

Tyre Pyrolysis Oil Catalyst

Model

DZC-TA ; DZC-TB

Appearance

Stripe

Diameter(mm)

Φ1-3

Length(mm)

5~15

Pore Volume (ml/g)

>0.3

BET (m2/g)

≥230

Bulk Density(g/ml)

≥0.6

Intensity(N/cm)

≥150